How to Clean Window Cleaning and Screens

Window screens are an overlooked hero, keeping out dust, dirt, and other unsightly bits that could clog up the air in your home.

If you take good care of them, they can stay clean and fresh for many years to come. But they do require some attention every now and then to keep them looking gleaming and free from grime and dirt. Click for more info.


Vacuuming is a good way to remove dust and dirt that’s hidden behind windows and screens. It also helps prevent streaks and smudges that can cause your window to look dull or stained.

If your window screens are a little dusty, you can use a lint brush to roll over them on both sides two or three times. This should get the majority of loose dust out and make it easier to clean them further.

For a deeper cleaning, a vacuum with a soft brush attachment may be the best tool to use. But be sure to keep the vacuum a decent distance away from your screen as the hose will damage it when it comes into contact with it.

If your window screens are very dirty, you may need to plug in your vacuum cleaner and use a cleaning solution like dish soap, vinegar or ammonia. These solutions are strong enough to cut through dirt and will also leave your windows smelling fresh.


If you’ve ever taken a bath, you know that it’s one of the best ways to relax. Not only can it help you get rid of any tension and stress, but it can also be used as an effective cleaning method.

During your bath, you can use a squeegee to wipe down the inside and outside of your windows. This is an easy and inexpensive way to clean your window frames and glass.

To use, start by removing your screens from the window (if you have them). Remove any stickers or labels from the screen, and place them in a bucket.

Add a little soap to the water in the bucket. Gently rub the soapy solution into the screen, starting from the top.

Before the screen dries, turn on your hose and rinse it off with the nozzle at a low pressure. This will prevent you from loosening the screen from its spline, which can make it saggy or leave gaps between the spline and the frame.


Window screens are a great way to keep out the elements, but they can also be a real pain when they get caked with dirt and grime. Whether they get dirty from sun, wind or snow or just become a magnet for dust and other allergens, a good cleaning is essential.

If your screens are especially scuffed up, you can give them a little bit of a bath by giving them a light spray with a hose. Just make sure to set the nozzle to its lowest pressure setting, so you don’t damage them.

For a more detailed scrub, use a sponge or a scrubbing brush. The sponge will remove dirt, and the scrubbing brush can help remove bird droppings, spider webs or other unsightly messes. Rinse the screen thoroughly to get rid of any excess soap and then dry it with a towel or rag.


A brush is an implement typically consisting of bristles fastened into a handle and used in scrubbing, polishing, grooming or applying a liquid. The verbs to brush and swab refer to light contact with something, usually in passing, and are often used in conjunction with other words that have similar meanings (see below).

Window cleaners use brushes to scrub windows and screens. These brushes are lightweight and can withstand cleaning chemicals without causing damage to the surface.

These brushes can also be made with different materials depending on the specific cleaning application, including aluminum oxide, tungsten and silicon carbide.

The handle of the brush needs to be durable enough to hold up to constant use but still have a good grip. The bristles are attached to the handle in several ways, most commonly by a stem wire that is twisted tightly around the filaments.

A swab is a small device with a sharp point that can be used to gather secretions from the nose or throat for medical testing. This type of swab is often used to test for otitis media and whooping cough. Read This Page.